Which is the best way to backfill a bathroom

The backfilling of the bathroom is a crucial part of any renovation. Backfilling is an essential part of bathroom renovations. It serves many purposes, including protecting the pipeline and stopping leaks. It also improves the thermal insulation capability of the room. In selecting bathroom materials, you should consider several factors depending on your specific situation. For example, take into account the performance and cost of backfill material as well the environmental protection.

There are five types of backfills available on the market: common slags, carbon-slags backfills (also known as carbon-slag slags), ceramics backfills and foam cements backfills. We are confused about the different types of backfills.

Backfilling with slag can be cheaper, but because it is heavy and can cause the slab to crack easily, this could lead to leaks.

It is cheaper to use overhead backfill because you do need less material.

Since a few decades, foamed concrete has been popular for filling bathroom backfill. But does foamed cemented have any disadvantages?

For your information, here are five bathroom backfill materials with their advantages and disadvantages and some selection advice:

Building debris backfill

Advantages:

The advantages of slag backfill are its lower cost, ease of construction and certain thermal insulation properties.

Disadvantages:

Backfilling with construction waste will damage the waterproof layer and the pipeline due to its sharp edges.

Recommendation:

Has been eliminated. This is not a method that should be used. It will cost too much for the family to backfill with construction debris. To protect the waterproofing of the ground, first use fine sand, then red bricks, to protect the pipeline. The backfill should be compacted in layers. Finally, mud-mortar to level the surface will provide good secondary drainage.

Carbon Dregs Backfill

Advantages:

Carbon slag as a backfill has many advantages, including its low cost, ease of construction, lightweight structure, good moisture absorption, and excellent moisture control.

Disadvantages:

The disadvantages of carbon dregs are that they are not stable enough. They can easily deform and fall off. They’re also relatively weak, and easy to absorb moisture.

Recommendation:

In recent years, carbon slag has rarely been chosen as a backfill in bathrooms due to its negatives.

Ceramic Backfill

Advantages:

Ceramic backfill has many benefits, such as being lightweight, strong, corrosion resistant, and having a long life.

Disadvantages:

Before pouring in the ceramic, use lightweight bricks for layered partition. Divide the bathroom into several squares. Fill the squares with the ceramic, then place a reinforcing mesh with a diameter around one centimetre. Finally, level with cement mortar.

Consider your family’s budget in its entirety.

Overhead Backfill

Advantages:

Backfilling with overhead backfill has many advantages, including its simplicity, stability, inability to deform and easy fall-off.

Disadvantages:

The labour cost of backfilling is higher because the construction cycle is longer. The bottom drain is located overhead and will make the sound of running waters more noticeable.

It is important to carefully consider whether the disadvantages of the situation outweigh any advantages.

Foamed Cement Backfill

Advantages:

Foamed cement is an increasingly popular backfill. It is also safe and eco-friendly. The raw material for cement foaming agents, plant-based fat acid, is both safe and environmentally friendly.

Benefits include good heat conservation, light weight, high strength and corrosion resistance. The backfilling process is greatly accelerated and reduced in cost, as it can be filled seamlessly and with very little effort.

Foamed cement can be mixed with cement and used to fix the pipe. If not, the pipe will easily float.

Disadvantages:

It is best to find a builder that has worked with foam cement or look up construction tutorials.

Suggestion:

The majority of people backfill their bathrooms with foamed-cement. Its advantages are still quite obvious.

The five types of backfill for bathrooms all have advantages and disadvantages. In order to choose the best material for your bathroom backfill, you should consider a number of factors. You must always consider the environmental aspect when choosing bathroom backfill materials to ensure the decor of the bathroom is safe and sustainable.

3D Printing Alloy Materials Custom K403 Metal Powder

About 3D Printing Alloy K403 Metal Powder:


Powder characteristics: high powder sphericity, smooth surface, fewer satellite balls, low oxygen content, uniform particle size distribution, good 
fluidity, and high bulk density and tap density.

Applicable Process: Custom 3D printing widely used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), direct laser deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM), etc. Process.

 

Applicable equipment: Metal 3D printing materials can also used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum, and so on.

 

3D printing powder application: We use the nickel-based metal powder in industrial and aviation steam turbines, petrochemicals, nuclear reactors, laser cladding, and other fields.

 

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition(weight %):

TypeCNiCrCoMoWAlTiZrFe
K4030.11-0.2Bal.10.0-12.04.5-6.03.8-4.53.8-5.55.3-5.92.3-2.90.03-0.08≤2.0

Powder oxygen and nitrogen content:

 

Paticle sizeO/ppmN/ppm
15-53 μm≤400≤300
45-105 μm≤300≤200

 

Storage Condition of Metal 3D Printing Materials:

Damp reunion will affect Metal 3D Printing Materials dispersion performance and using effects, therefore,Metal 3D Printing Materials should be sealed in vacuum packing and stored in cool and dry room, the titanium aluminum carbide can not be exposure to air. In addition, the Metal 3D Printing Materials should be avoided under stress.

 

Packing & Shipping of Metal 3D Printing Materials:

We have many different kinds of packing which depends on the Metal 3D Printing Materials quantity.

Metal 3D Printing Materials packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Metal 3D Printing Materials shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.

3D Printing Alloy Materials Custom K403 Metal Powder插图

 

3D Printing Alloy Materials Custom K403 Metal Powder Properties

Other NamesMaterials Custom K403 Metal
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Materials Custom K403 Metal Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

Nitinol Nickel Titanium Ni-Ti Alloy Powder

About Nitinol Nickel Titanium Ni-Ti Alloy Powder:
Nickel-titanium alloy, also called Nitinol Powder, is a metal alloy of nickel and titanium, in which the atomic percentages of the two elements are roughly equal. Different alloys are named according to the weight percentage of nickel, such as nickel. Nitinol 55 and Nitinol 60. It shows the shape memory effect and superelasticity at different temperatures.

Ni Ti is a shape memory alloy, a special alloy that can automatically restore its plastic deformation to its original shape at a certain temperature. Its expansion rate exceeds 20%, its fatigue life reaches 7 times 1 * 10, its damping characteristics are 10 times that of ordinary springs, and its corrosion resistance is better than the best medical stainless steel at present, so it can meet a variety of Engineering requirements and is an excellent functional material to meet the needs of medical applications.
In addition to having a unique shape memory function, memory alloys also have excellent characteristics such as wear resistance, corrosion resistance, high damping and superelasticity.


If you want to know nickel titanium price/nickel titanium alloy price, please send inquiry to sales1@rboschco.com


Nitinol metal has two closely related and unique properties: shape memory effect and superelasticity (also called pseudoelasticity). Shape memory is the ability of Nitinol to deform at a temperature, maintain its deformed shape when an external force is removed, and then restore its original undeformed shape when heated above its “transition temperature”. Superelasticity is the ability of a metal to withstand large deformations and immediately restore its undeformed shape after the external load is removed. Nitinol 3d printing deforms 10 to 30 times that of ordinary metals and restores its original shape. Whether Nitinol alloy exhibits shape memory effect or superelasticity depends on whether it is higher than the transition temperature of a particular alloy. Below the transition temperature, it exhibits a shape memory effect; above the transition temperature, it exhibits superelasticity. Feel free to send an inquiry to get the latest price if you would like to buy Nitinol Nickel Titanium Ni-Ti Alloy Powder in bulk.

   Miron nitinol powder, Ni-Ti alloy powder
    Particle size: 15- 53 micron
    Ni:Ti:5:5 or as your request
    Purity:99.9%
    Package:Vacuum packing, 1kg/bag, or as your request. 
    Sphere percentage: 99.9% (Min)
    Making Method: Laser evaporating


   Nano nitinol powder, Ni-Ti alloy powder
    Particle size: 70nm
    Ni:Ti:5:5 or as your request
    Purity:99.9%
    Shape:spherical
    Package:Vacuum packing, 1kg/bag, or as your request. 
    Sphere percentage: 99.9% (Min)
 

How is Nitinol Nickel Titanium Ni-Ti Alloy Powder produced?
Nitinol is extremely difficult to manufacture due to the need for very strict composition control and the excellent reactivity of titanium. Every atom in titanium that combines with oxygen or carbon is an atom taken from the nitinol chemical composition lattice, which changes the composition and lowers the phase transition temperature. There are two main melting methods:

Vacuum arc remelting (VAR)
This is achieved by generating an arc between the raw material and the water-cooled copper strike plate. The melting is done under a high vacuum, and the mold itself is water-cooled copper.

Vacuum induction melting (VIM)
This is done by heating the raw material in a crucible (usually carbon) using an alternating magnetic field. This is also done under a high vacuum.

Although these two methods have their advantages, it has been proven that compared with the VART smelting process, the VIM smelting process material has lower inclusions and thus has higher fatigue resistance. Other research reports point out that the use of ultra-high-purity plasticizers from raw materials can reduce the number of inclusions and improve fatigue performance. Other methods can also be used on a boutique scale, including plasma arc melting, induction skull melting and electron beam melting. Physical vapor deposition is also used on a laboratory scale.

The hot working of Nitinol is relatively easy, but cold working is difficult, because the huge elasticity of the alloy increases the contact between the mold or the roller, resulting in huge frictional resistance and tool wear. For similar reasons, machining is very difficult, and worse, the thermal conductivity of Nitinol is very poor, so it is difficult to remove heat. Grinding (abrasive cutting), electrical discharge machining (EDM) and laser cutting are all relatively easy.

Applications of Nitinol Nickel Titanium Ni-Ti Alloy Powder:
The tensile strength du of Nitinol can reach 1000 MPa. In other words, it takes more than 100 dry grams of force per square millimeter to break it, which is stronger than ordinary steel, and also has good “memory” performance and corrosion resistance.
Nitinol alloy contains 50% nickel and 50% titanium, that is, the components of nickel and titanium are equally divided, each accounting for half. The temperature range of its shape memory can be adjusted by controlling the components. Generally, the higher the nickel content of Nitinol, the lower the working temperature. When it contains 55% nickel and 45% titanium, the memory alloy can work at room temperature.

People have made use of this characteristic of shape memory alloy to make pearl necklaces and bracelets made of shape memory alloy wires, and bras woven with shape memory alloy wires. Wearing these decorations and health products on the body will restore the original curvature and stiffness under the action of the body temperature, thereby playing a decorative and health care function. 

Besides, you can also use Nitinol alloy to make orthodontic wires to correct deformed teeth using human oral temperature.

Nitinol can be used to replace traditional actuators (solenoids, servo motors, etc.), such as the simple six-legged robot Stiquito.

Nitinol springs are used for fluid thermal valves, where the material acts as both a temperature sensor and an actuator.

The alloy is used as an auto-focus actuator in sports cameras and as an optical image stabilizer in mobile phones.

Alloys are used in pneumatic valves to achieve comfortable seats and have become industry standards.

The alloy Chevrolet Corvette contains a nickel-titanium memory alloy actuator, which replaces the heavier electric transmission to open and close the hatch to release air from the torso, making it more accessible.

Nitinol Titanium Ni-Ti Alloy Powder Storage Conditions:
Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the product should be avoided under stress. 

Product Name:Factory supply ultrafine Ni-Ti alloy nitinol powder
Nitinol powder color:grayish black
Nitinol powder purity:99.9%
Nitinol powder size:15-53 micron and 70nm
Nitinol powder MOQ:0.1kg
Nitinol powder shape:spherical
Nitinol powder storage:kept in a shady, ventilating and dry storehouse
Nitinol powder transportation:avoid violent collision, rain drenching, sunning, and can’t take mixed transportation with strong oxidants during transporting


Packing & Shipping of Nitinol Titanium Ni-Ti Alloy Powder:
We have many different kinds of packing which depends on the nitinol titanium Ni-Ti alloy powder quantity.
Nitinol titanium Ni-Ti alloy powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Nitinol titanium Ni-Ti alloy powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.
Nitinol Nickel Titanium Ni-Ti Alloy Powder插图

Nitinol Powder Properties

Other Namesnickel titanium, shape memory nitinol, NiTi, Ni-Ti,
nickel-titanium shape-memory alloy (SMA)
CAS No.52013-44-2
Compound FormulaNiTi
Molecular WeightN/A
AppearanceBlack Powder
Melting Point1300 °C
Boiling PointN/A
Density6.45 g/cm3
Solubility in H2ON/A
Poisson’s Ratio0.33
Specific Heat0.20 cal/g·°C
Tensile Strength895 MPa (Ultimate, fully annealed)
Thermal Conductivity0.18 W/cm (austenite), 0.086 W/cm (martensite)
Thermal Expansion11.0 x 10-6/°C (austenite), 6.6 x 10-6/°C (austenite)
  
  

Nitinol Powder Health & Safety Information

Signal WordN/A
Hazard StatementsN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
Transport InformationN/A
Inquiry us

3D Printing Alloy Metal Materials Mold Steel Powder 18Ni300 Metal Powder

About Mold Steel Powder 18Ni300 Metal Powder:

Powder characteristics: high powder sphericity, low oxygen content, uniform particle size distribution, good fluidity, high bulk density and tap density, and wide application in powder metallurgy and 3D printing.


Applicable Process: Powder can be used in laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM) and other processes.


Applicable equipment: Powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

 

Powder Applications: Iron-based metal powders are used in 3D printed thin-walled devices and complex parts, thermal spray, laser cladding, and biomedical applications.

 

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition(weight %):

TypeCSiNiCrCoMoAlCuTiFe
18Ni300≤0.03≤0.117.0-19.0≤0.58.5-9.54.5-5.2≤0.05-0.15≤0.50.6-0.8Bal.

 

Powder oxygen and nitrogen content:

Particle sizeO/ppmN/ppm
15-53μm≤800≤600
45-105μm≤500≤600

 

Storage Condition of Mold Steel Powder 18Ni300:

Damp reunion will affect Mold Steel Powder 18Ni300 dispersion performance and using effects, therefore,Mold Steel Powder 18Ni300 powder should be sealed in vacuum packing and stored in cool and dry room, the Mold Steel Powder 18Ni300 can not be exposure to air. In addition, the Mold Steel Powder 18Ni300 powder should be avoided under stress.

 

Packing & Shipping of Mold Steel Powder 18Ni300:

We have many different kinds of packing which depends on the Mold Steel Powder 18Ni300 powder quantity.

Mold Steel Powder 18Ni300 packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Mold Steel Powder 18Ni300 shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.

3D Printing Alloy Metal Materials Mold Steel Powder 18Ni300 Metal Powder插图

 

3D Printing Alloy Metal Materials Mold Steel Powder 18Ni300 Metal Powder Properties

Other Names18Ni300 Powder
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Metal Materials Mold Steel Powder 18Ni300 Metal Powder Metal Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

3D Printing Alloy Metal Materials GH3536 Hastelloy X Powder

About 3D Printing Alloy GH3536 Hastelloy X Powder:

Powder characteristics: 3D Printing Powder Material, high powder sphericity, smooth surface, fewer satellite balls, low oxygen content, uniform particle size distribution, good fluidity, and high bulk density and tap density.

 

Applicable Process: Superalloy powder Widely used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), direct laser deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM), etc. 

 

Applicable equipment: 3D metal printing powder can also used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum, and so on.

 

Powder application: We use the nickel-based metal powder 3D metal powder price in industrial and aviation steam turbines, petrochemicals, nuclear reactors, laser cladding, and other fields.

 

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition(weight %):

TypeCSiMnNiCrCoMoWAlCuTiPSFe
GH3536 0.05-0.15≤1.0≤1.0Bal.20.5-23.00.5-2.58.0-10.00.2-1.0≤0.5≤0.5≤0.15≤0.025≤0.01517.0-22.0

Powder oxygen and nitrogen content:

 

Particle sizeO/ppmN/ppm
15-53 μm≤400≤300
45-105 μm≤300≤200

 

Storage Condition of 3D metal printing powder:

Damp reunion will affect 3D metal printing powder dispersion performance and using effects, therefore, 3D metal printing powder should be sealed in vacuum packing and stored in cool and dry room, the 3D metal printing powder can not be exposure to air. In addition, the 3D metal printing powder should be avoided under stress.

 

Packing & Shipping of 3D metal printing powder:

We have many different kinds of packing which depends on the 3D metal printing powder quantity.

3D metal printing powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

3D metal printing powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.

 


3D Printing Alloy Metal Materials GH3536 Hastelloy X Powder插图

 

3D Printing Alloy Metal Materials GH3536 Hastelloy X Powder Properties

Other NamesGH3536 Powder
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Metal Materials GH3536 Hastelloy X Powder Metal Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

3D Printing Alloy Metal Materials Mold Steel M2 Metal Powder

About Mold Steel Powder M2 Metal Powder:

Powder characteristics: high powder sphericity, low oxygen content, uniform particle size distribution, good fluidity, high bulk density and tap density, and wide application in powder metallurgy and 3D printing.

 

Applicable Process: Powder can be used in laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM) and other processes.

 

Applicable equipment: Powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

 

Powder Applications: Iron-based metal powders are used in 3D printed thin-walled devices and complex parts, thermal spray, laser cladding, and biomedical applications.

 

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition(weight %):

TypeCSiMnCrMoVWFe
M20.8-0.90.15-0.40.2-0.453.8-4.44.5-5.51.75-2.25.5-6.75Bal.

 

Powder oxygen and nitrogen content:

Particle sizeO/ppmN/ppm
15-53 μm≤800≤600
45-105 μm≤500≤600

 

Storage Condition of Mold Stainless Steel Powder M2:

Damp reunion will affect M2 powder dispersion performance and using effects, therefore, Mold Stainless Steel Powder M2 should be sealed in vacuum packing and stored in cool and dry room, the Mold Stainless Steel Powder M2 can not be exposure to air. In addition, the M2 powder should be avoided under stress.

 

Packing & Shipping of Mold Stainless Steel Powder M2:

We have many different kinds of packing which depends on the Mold Stainless Steel Powder M2 quantity.

Mold Stainless Steel Powder M2 packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Mold Stainless Steel Powder M2 shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.

3D Printing Alloy Metal Materials Mold Steel M2 Metal Powder插图

 

3D Printing Alloy Metal Materials Mold Steel M2 Metal Powder Properties

Other Names18Ni300 Powder
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Metal Materials Mold Steel M2 Metal Powder Metal Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

3D Printing Alloy Metal Materials Stainless Steel 17-4PH Metal Powder

About Stainless Steel Powder 17-4PH Metal Powder:

Powder characteristics: high powder sphericity, low oxygen content, uniform  particle size distribution, good fluidity, high bulk density and tap density, and wide application in powder metallurgy and 3D printing.

 

Applicable Process: Powder can be used in laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM) and other processes.

 

Applicable equipment: Powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

 

Powder Applications: Iron-based metal powders are used in 3D printed thin-walled devices and complex parts, thermal spray, laser cladding, and biomedical applications.

 

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition(weight %):

TypeCSiMnNiCrCuNbPSFe
17-4PH≤0.07≤1.0≤1.03.0-5.015.5-17.53.0-5.00.15-0.45≤0.040.03Bal.

 

Powder oxygen and nitrogen content:

Particle sizeO/ppmN/ppm
15-53μm≤800≤600
45-105μm≤500≤600

 

Storage Condition of Stainless Steel 17-4PH Powder:

Damp reunion will affect 17-4PH powder dispersion performance and using effects, therefore, Stainless Steel 17-4PH Powder should be sealed in vacuum packing and stored in cool and dry room, the Stainless Steel 17-4PH Powder can not be exposure to air. In addition, the Stainless Steel 17-4PH Powder should be avoided under stress.

 

Packing & Shipping of Stainless Steel 17-4PH Powder:

We have many different kinds of packing which depends on the Stainless Steel 17-4PH Powder quantity.

Stainless Steel 17-4PH Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Stainless Steel 17-4PH Powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.


3D Printing Alloy Metal Materials Stainless Steel 17-4PH Metal Powder插图

 

3D Printing Alloy Metal Materials Stainless Steel 17-4PH Metal Powder Properties

Other Names17-4PH Powder
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Metal Materials Stainless Steel 17-4PH Metal Powder Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder

About Iron Nickel Alloy InVar36 Metal Powder:

Powder characteristics: Iron-based 3D Printing Powder,high powder sphericity, low oxygen content, uniform particle size distribution, good fluidity, high bulk density and tap density, and wide application in powder metallurgy and 3D printing.

 

Applicable Process:  InVar36 Powder can be used in laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM) and other processes.

 

Applicable equipment: 3D Metal Powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

 

Powder Applications: Iron-based metal powders are used in 3D printed thin-walled devices and complex parts, thermal spray, laser cladding, and 
biomedical applications.

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition (wt %):

TypeCSiMnNiCrCoAlMgTiZrPSFe
InVar36≤0.05≤0.4≤0.636.0≤0.25≤0.5≤0.1≤0.1≤0.1≤0.1≤0.015≤0.015Bal.

 

Powder oxygen and nitrogen content:

Particle sizeO/ppmN/ppm
15-53 μm

≤800

≤600
45-105 μm≤500≤600

 

Storage Condition of InVar36 Metal Powder:

Damp reunion will affect Iron-based 3D Printing Powder dispersion performance and using effects, therefore, Iron-based 3D Printing Powder should be sealed in vacuum packing and stored in cool and dry room, the Iron-based 3D Printing Powder can not be exposure to air. In addition, the Iron-based 3D Printing Powder should be avoided under stress.

 

Packing & Shipping of InVar36 Metal Powder:

We have many different kinds of packing which depends on the Iron-based 3D Printing Powder quantity.

Iron-based 3D Printing Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Iron-based 3D Printing Powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.


3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder插图

 

3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder Properties

Other NamesInVar36 Powder
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Metal Materials Iron Nickel Alloy InVar36 Metal Powder Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

3D Printing Alloy Metal Materials Stainless Steel 440C Metal Powder

About Stainless Steel 440C Metal Powder:

Powder characteristics: 3D Printing Powder, high powder sphericity, low oxygen content, uniform particle size distribution, good fluidity, high bulk density and tap density, and wide application in powder metallurgy and 3D printing.

 

Applicable Process: Stainless Steel 440C Powder can be used in laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM) and other processes.

 

Applicable equipment:3D Metal Powder can be used in various types of metal 3D printers, including Renishaw in the UK, EOS (EOSINT M series) in Germany, Concept Laser, 3D systems in the United States, laser melting equipment, and domestic research institutes and enterprises. Research and development of selected laser melting equipment, such as Huaying Hi-Tech, Platinum and so on.

 

Powder Applications: Iron-based metal powders are used in 3D printed thin-walled devices and complex parts, thermal spray, laser cladding, and 
biomedical applications.

 

Product specifications: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. (All kinds of granular metal powder can be customized according to customer requirements)

 

Chemical composition (wt %):

TypeCSiMnNiCrMoPS
SS440C0.95-1.20≤1.0≤1.0≤0.6016.0-18.0≤0.75≤0.035≤0.03

 

Powder oxygen and nitrogen content:

Particle sizeO/ppmN/ppm
15-53 μm≤800≤600
45-105 μm≤500≤600

 

Storage Condition of Stainless Steel 440C Powder:

Damp reunion will affect Stainless Steel 440C Powder dispersion performance and using effects, therefore, Stainless Steel 440C Powder should be sealed in vacuum packing and stored in cool and dry room, the Stainless Steel 440C Powder can not be exposure to air. In addition, the Stainless Steel 440C Powder should be avoided under stress.

 

Packing & Shipping of Stainless Steel 440C Powder:

We have many different kinds of packing which depends on the Stainless Steel 440C Powder quantity.

Stainless Steel 440C Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Stainless Steel 440C Powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.


3D Printing Alloy Metal Materials Stainless Steel 440C Metal Powder插图

 

3D Printing Alloy Metal Materials Stainless Steel 440C Metal Powder Properties

Other Names440C Powder
CAS No.N/A
Compound FormulaN/A
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Metal Materials Stainless Steel 440C Metal Powder Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us

3D Printing Alloy Spherical Tantalum Ta Powder CAS 7440-25-7

About 3D Printing Alloy Tantalum Powder:


Product name: Spherical Tantalum Powder

 

Product specifications: 5-25μm, 15-45μm, 15-53μm, 45-75μm, 45-105μm, 75-150μm. (Various granularities can be customized according to customer requirements)

 

Powder characteristics: high purity (≥99.9%), ultra-low oxygen (≤600ppm), high sphericity (≥98%), uniform particle size distribution, excellent flow properties (≤8.0s/50g) and high bulk density (≥6.5g/cm3) and tap density (≥8.0g/cm3).

 

Applicable processes: laser/electron beam additive manufacturing (SLM/EBM), laser direct deposition (DLD), powder hot isostatic pressing (HIP), metal injection molding (MIM), powder metallurgy (PM), laser cladding ( LC) and other processes.


Powder application: Tantalum has excellent biocompatibility, and tantalum implants formed by 3D printing have the elastic modulus closest to human cartilage tissue, making them the most ideal orthopedic implant materials.  Rf plasma spheroidized tantalum powder has the characteristics of high sphericity, good fluidity, high purity, large loose density, full density inside particles, no hollow powder, etc., which is widely used in biomedical field.  


Composition (percentage by mass):
Ta.jpg

Storage Condition of Spherical Tantalum Powder:

Damp reunion will affect Spherical Tantalum powder dispersion performance and using effects, therefore,Spherical Tantalum Powder should be sealed in vacuum packing and stored in cool and dry room, the Spherical Tantalum Powder can not be exposure to air. In addition, the Spherical Tantalum powder should be avoided under stress.

 

Packing & Shipping of Spherical Tantalum Powder:

We have many different kinds of packing which depends on the Spherical Tantalum Powder quantity.

Spherical Tantalum Powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.

Spherical Tantalum Powder shipping:could be shipped out by sea , by air, by express as soon as possible once payment receipt.

3D Printing Alloy Spherical Tantalum Ta Powder CAS 7440-25-7插图1

 

3D Printing Alloy Spherical Tantalum (Ta) Powder Properties

Other NamesTantalum Powder
CAS No.N/A
Compound FormulaTa
Molecular WeightN/A
AppearanceGray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting PointN/A
Solubility in waterN/A
DensityNA
PurityN/A
Particle Size0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact MassN/A
Monoisotopic MassN/A
  
  

3D Printing Alloy Spherical Tantalum Powder Health & Safety Information

Safety WarningN/A
Hazard StatementsN/A
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK GermanyN/A
Inquiry us