What is Tantalum Carbide TaC Powder?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Introduction to Tantalum Carbide TAC Powder Tantalum carbide Oder TaC It is a light-brown metallic cubic crystal powder belonging to the sodium chloride cubic cristal system. It is 14.3g/cm3.
Insoluble in water, insoluble with inorganic acid, soluble hydrofluoric acid, and nitric acids mixed acid and degradation. It is strong in oxidation resistance, and easily melts and decomposes by potassiumpyrosulfate. Superconductivity is demonstrated by its high conductivity and resistance of 30O at normal room temperatures.
Tantalum carbide This is used in powder metalurgical, cutting tools and chemical vapor deposition. It also makes hard-wear-resistant alloy cutting tools. The tantalum carbide sintered body has a golden color, and can be used to decorate watches.
Tantalum Carbide TaC Powder Properties
Other names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Formula compound TaC
Molecular Weight 192.96
Appearance Powders from brown to dark brown
Melting Point 3850degC
Boiling Point 4780-5470 degC
Density 14.3-14.7g/cm3
Solubility of H2O Insoluble
Exact Mass 192.948
Tantalum Carbide TaC Powder Cas 12070-06-3
Preparation Methods for Tantalum Carbide TaC powder
1. For TaC powder, mix tantalum pentoxide and solid carbon ball mills. At 1700, the mixture should be reduced and carburized in an oxygen-free atmosphere (mainly vacuum and argon atmospheres).
2. By heat treating in a non-oxidizing environment using the liquid precursor, nano tantalum caride powder was obtained. A small glass rod was used to stir 5mL of anhydrousethanol into a small vessel containing 0.50gTaCL5. Then it was placed into an ultrasonic cleaner. It had a heating temperature at 55°C and a frequency of 40kHz. Ultrasonic power was 80W. After ultrasonic oscillation lasting 5-10min was completed, 0.10g nanoactivated carbon was added to the cleaner. The oscillation continued for 15-20 minutes. Then, pour it into the crucible. Coat it well on the inner wall. Dry it with a hot fan. The crucible containing the sample was placed into a vacuum hot pressing furnace at 1300 in a 100Pa vacuum or hydrogen atmosphere. At 1400 in an argon atmosphere, the holding time is 0.55h, and the heating speed is 20/min. Use a brush to brush the products in crucible after the experiment.
3. Tantalum pentoxide can be converted to heat in the atmosphere Potassium pyrosulfate can be fused. Tantalum and carbon, or tantalum pentoxide, and black in an inert environment heated to 1900 reaction.
4. Use tantalum pentoxide or methane as reaction gas. Argon as the carrier. Silicon carbide resistance from external radiation heating, carbonization, silicon carbide resistance for the carbonization or tantalum peroxide combined with carbon black. Pressurized powder molding. Heating in hydrogen or vacuum.

Tantalum Carbide TaC Powder
It is widely used in industry as well as the military. It is used extensively in cemented carbide as an additive. Its primary function it to increase the high temperature strength of cemented carbide and to prevent the growth of tungsten-carbidide particles.
Use as a hard coating on cutting tools to increase the wear resistance and chemical resistance of the base material.
It can be used by the military as a coating on jet engine turbine blades.
Because it is conductive, it can be used as an electrode material by using electric discharge wires to create complex shapes.
The second phase of the particle reinforced metal matrix composites can be used in aerospace and metallurgy as well as for electric power, hydropower, mining, among other applications.

Main Supplier for Tantalum-Carbide TaC Powder
Technology Co. Ltd. is a trusted global supplier of chemical material and manufacturer. They have over 12 years experience in producing super high-quality chemicals, Nanomaterials, such as silicon powder.
Tantalum carbide TaC powder is available in high quality. Contact us today to make an inquiry. (brad@ihpa.net)